Ooma AirDial POTS replacement
Ooma AirDial keeps fire alarm panels, elevator phones, security alarms, gates and fax machines connected after your copper phone lines go away. POTS Saver audits your lines, plans the switch and schedules Ooma AirDial installation anywhere in the U.S., with service, equipment and standard installation in one monthly price.
From $50 per line, per month
- Ethernet and LTE cellular used together (Ooma MultiPath)
- About 16 hours of battery backup, 24+ with an external battery
- California State Fire Marshal and FDNY certified for fire alarm panels
- Remote Device Management with text and email alerts
- Installation scheduled nationwide
What is Ooma AirDial?
Ooma AirDial is a turnkey POTS replacement from Ooma. It combines an AirDial base station, Ooma’s virtual analog phone service, a nationwide wireless data and voice network, and cloud-based Remote Device Management, all on one monthly bill.
The base station sits where your copper phone lines enter the building. Fire alarm panels, elevator phones, alarm panels, gate call boxes and fax machines plug into its analog phone ports just as they plug into the wall today, so you keep your existing equipment. Instead of copper, AirDial sends every call over your wired internet and LTE cellular at the same time, using Ooma MultiPath technology, so a single outage doesn’t cut you off.
Why organizations choose it
- Built for life-safety lines. Designed for fire alarms, elevator phones and other equipment that often can’t move to ordinary VoIP.
- Two connections at once. Ethernet and LTE cellular, with cellular carrying calls if your internet goes down.
- Battery backup. About 16 hours built in, more than 24 hours with an optional external battery.
- Managed in one place. Every unit, line and alert in Ooma’s Remote Device Management portal.
- One provider, one bill. Service, equipment, cellular and phone service, setup and standard installation together.
Ooma AirDial certifications
Ooma reports the following certifications and compliance support for AirDial. Requirements vary by jurisdiction, so we confirm what your fire marshal, alarm company and elevator inspector need before we install.
California State Fire Marshal
Certified for connecting fire alarm panels in California.
FDNY
Certified by the Fire Department of the City of New York for connecting fire alarm panels.
UL 864 and UL 62368-1
Third-party testing for fire alarm control unit requirements and electrical safety.
Carrier certified
AT&T FirstNet network compatibility approved, Verizon certified, T-Mobile certified and PTCRB certified.
NFPA 72 and ASME A17.1
Designed to help meet fire alarm communication (NFPA 72) and elevator emergency communication (ASME A17.1) requirements.
HIPAA, PCI, Kari’s Law, RAY BAUM’S Act
Helps with HIPAA for analog fax and PCI for card terminals, with features that support Kari’s Law and RAY BAUM’S Act. TAA compliant.
Every AirDial unit in one portal
Real-time alerts
Text and email alerts when a unit goes offline, comes back, switches to battery, runs low on battery, or when chosen numbers like 911 are dialed.
Call logs
A live log of inbound and outbound calls on each line, for troubleshooting and confirming that equipment works.
Hunt groups and features
Hunt groups, ringdown, call forwarding, call blocking and voicemail, with shared caller ID across lines.
Roles and search
Owner, administrator, editor and user access, and search by phone number, equipment label or LTE status.
Temperature and signal
Each unit’s internal temperature, signal and battery status, so problem locations stand out.
Number porting and API
Keep your existing phone numbers, and pass AirDial status into monitoring tools through a REST API.
Ooma AirDial specifications
| Phone ports | 4 analog phone ports per unit, so one unit can replace up to 4 copper lines; larger sites use more units |
| Connections | 4G LTE cellular (dual SIM, multi-carrier) plus wired Ethernet, used at the same time |
| Voice network | Managed voice network option keeps call traffic off the public internet; voice encryption |
| Battery | About 16 hours standby; more than 24 hours with an optional external battery |
| Antennas | Two wideband antennas; external antennas available for weak-signal rooms |
| Alerts | Text and email: offline, back in service, on battery, battery low, back on power, chosen numbers dialed |
| Updates | Automatic firmware and software updates |
| Size | About 12 x 8 x 2.4 inches, with a front status display |
| Warranty | 1-year manufacturer warranty; equipment is included in your monthly price |
Ooma AirDial vs. copper POTS lines
- Connection: copper is a single path; AirDial uses Ethernet and LTE at the same time.
- Monitoring: a copper line gives no warning when it fails; AirDial sends alerts when a unit goes offline or onto battery.
- Cost: copper line prices keep climbing; AirDial is one predictable price per line.
- Future: carriers are retiring copper; AirDial doesn’t depend on it.
AirDial in a large office portfolio
In a case study published by Ooma, CP Group, a large Florida office landlord, connected 17 elevators using 14 AirDial units and reported a 50% cost reduction compared with traditional copper phone lines.
Your savings depend on what you pay today and how many lines you can cancel. The free landline audit shows you the numbers for your building.
Get my free auditOoma AirDial questions
Is Ooma AirDial approved for fire alarm panels?
Ooma reports California State Fire Marshal and FDNY certifications for connecting fire alarm panels, along with UL 864 testing, and designs AirDial to help meet NFPA 72. Your local fire authority has the final say, so we confirm requirements before installation.
Does Ooma AirDial work for elevator phones?
Yes. Elevator emergency phones plug into AirDial and can use ringdown to reach your monitoring service, and AirDial is designed to help meet ASME A17.1 requirements.
Can we keep our phone numbers?
Yes. Existing numbers can be ported to Ooma AirDial.
Does Ooma AirDial support fax?
Yes. Analog fax machines plug into AirDial, and it helps healthcare organizations with HIPAA when paired with analog fax.
How many lines does one unit handle?
Each AirDial unit has 4 analog phone ports, so one unit can replace up to 4 copper lines. Larger sites use more units.
From $50 per line, per month
Service, equipment, setup and standard installation included. $55 on a 3-year agreement, $60 on 1 year.
See pricingGet Ooma AirDial for your building
Tell us about your lines or the notice you received. We’ll tell you which lines matter and what Ooma AirDial will cost, at no charge.
Ooma and AirDial are trademarks of Ooma, Inc. POTS Saver is a service of Indigo Connected, an authorized Ooma partner. Certifications, specifications and case study as reported by Ooma.